Monday, January 10, 2011

Potomac Watershed Roundtable Meeting: The Virginia Watershed Implementation Plan, and septic regulation in Virginia

The most recent meeting of the Potomac Watershed Roundtable was in Warrenton, VA at Lord Fairfax Community College on January 7th 2011. The session addressed the Chesapeake Bay strict pollution diet, the Total Maximum Daily Load (TMDL) mandated by the EPA and the Virginia Chesapeake Bay Watershed Implementation Plan (WIP) to achieve the mandated reduction in nitrogen, phosphorus and sediment pollution.

The revised WIP also reduces the rate of growth in on-site sewage disposal systems, or septic. The stated intension is to raise the costs to operate a septic system through regulation which would make clustered systems or community systems more competitive and raise the overall cost of building and maintaining homes. The cost of constructing housing would increase in the area in response to these requirements. Though according to the Department of Environmental Quality, DEQ, it is not intended to limit regional growth, the requirements cannot help but impact housing costs and availability.

In addition the revised WIP proposes to require the offset new system loads through an expansion of the Nutrient Credit Exchange Program. The Commonwealth intends to implement amendments to Virginia Department of Health regulations for alternative systems which are currently a bit in limbo because of the temporary emergency regulations that the department of health has done little to enforce in much of the Commonwealth and are set to expire on April 7th 2011, but can be extended for 6 months.

The proposed amendments to the current Emergency Regulations that require all single family alternative onsite sewage systems, AOSS, continue to have professional operators certified by DPOR to operate and maintain the AOSS in accordance with the operating permit, and visited by the operator as specified in the operation permit (typically once or twice a year for preapproved commercial systems) and finally an annual maintenance report submitted to the regulators by the operator. In addition, sampling at startup to confirm proper functioning of the system and every five years for those systems put into operation after the date of the enabling legislation and not grandfathered, like mine.

In addition to those requirements the new legislation requires a minimum 50% reduction in delivered nitrogen for all new small alternative onsite systems in the Chesapeake Bay watershed resulting in an effective delivered load to the edge of the project boundary of 4.5 lbs TN/person/year. Single family home AOSSs are about to get very expensive in the Cheseapeake Bay Watershed if the regulations are enforced.

As Bob Marshall pointed out a few days ago, the civil penalty regulation establishing a uniform schedule penalties for violations of onsite sewage and alternative discharging sewage treatment system regulations. was withdrawn. There will be little or no enforcement. Those who ignore the law will not suffer any consequences. There seems to be very little follow through on the part of the VDH to even inform the public of the regulations.

The Potomac Watershed Roundtable of nine counties, six towns and cities, the six soil and water conservation districts and various stakeholders including interested citizens was at a loss of how to incorporate these requirements into their programs. If these regulations are necessary and appropriate, then they should not be voluntary. The public should be informed and simple and reasonable penalties established. The public comment period on these changes closes on February 4th 2011. There will be a public hearing on January 25th 2011 at 10 AM at the James Madison Building at 109 Governor Street in Richmond, VA.

Thursday, January 6, 2011

Iron and Manganese in Well Water

Many of the perceived problems with well water are caused by the presence of iron and manganese. Iron and manganese can give water an unpleasant taste, odor and color. Iron causes reddish-brown stain on laundry, porcelain, dishes, utensils, glassware, sinks, fixtures and concrete. Manganese causes brownish-black stains on the same items. Detergents do not remove these stains. Chlorine bleach and sodium carbonate may even make the staining worse. Iron and manganese deposits build up in pipelines, pressure tanks, water heater and water softening equipment. These deposits restrict the flow of water and reduce water pressure. More energy is required to pump water through clogged pipes and heat water if the hot water tank’s heating rods are coated with minerals deposits. In addition, water contaminated with iron and manganese often contains iron or manganese bacteria which feed on the minerals. These bacteria do not cause health problems, but can form a reddish brown or brownish black slime in toilet tanks and clog filters.

Iron and manganese are naturally occurring elements commonly found in groundwater in many parts of the country. Interestingly enough, few surface water sources have high levels of these metals. At t levels naturally present in groundwater iron and manganese do not present a health hazard. However, their presence in well water can cause unpleasant taste, staining and accumulation of mineral solids that can clog water treatment equipment and plumbing. In addition, a persistent bacteria/ biofouling problem may be caused by iron bacteria. Under guidelines for public water supplies set by the Environmental Protection Agency (EPA), iron and manganese are considered secondary contaminants. Secondary standards apply to substances in water that cause offensive taste, odor, color, corrosion, foaming, or staining but have no direct impact on health. The standard Secondary Maximum Contaminant Level (SMCL) for iron is 0.3 milligrams per liter (mg/L or ppm) and 0.05 mg/L for manganese. This level of iron and manganese are easily detected by taste, smell or appearance.

Iron and manganese exist in many different chemical forms. The presence of a given form of iron or manganese in geologic materials or water depends on many different environmental factors. Dissolved iron and manganese are easily oxidized to a solid form by mixing with air. In surface water, iron and manganese are most likely to be trapped within suspended organic matter particles. Groundwater tends to be an oxygen poor environment; typically, the deeper the aquifer the less dissolved oxygen is present. Iron and manganese carbonates in an oxygen poor environment are relatively soluble and can cause high levels of dissolved iron and manganese to be carried from a deep well. If sulfur is present in the water then the iron will form iron sulfide rather than iron carbonate and the water may have the familiar unpleasant rotten egg smell. Sometimes oxygen poor conditions can also occur in relatively shallow wells that have stagnant water with very slow turnover. When the iron and manganese are oxidized reddish brown or black particles form and settle out as water stands. These particles are often found trapped in washing machine filters, water treatment equipment, in plumbing fixtures and on clothing, dishes and utensils.

As mentioned above some types of bacteria react with soluble forms of iron and manganese and form persistent bacterial contamination in a water system (especially one with any type of filter or treatment system to capture these iron or manganese bacteria). These organisms are usually found in waters that have high levels of iron and manganese in solution. The reaction changes the iron and manganese from a soluble form into a less soluble form, thus causing precipitation and accumulation of black or reddish brown gelatinous material (slime). Masses of mucous, iron, and/or manganese can clog plumbing and water treatment equipment. They also slough off in globs that become iron or manganese stains on laundry. Bacterial reactions with iron and manganese do not cause any additional precipitation compared to normal exposure to oxygen. However, precipitation caused by bacteria occurs faster and the slime tends to concentrate staining making it more annoying.

All systems of removing iron and manganese essentially involve oxidation of the soluble form or killing and removal of the iron bacteria.  When the total combined iron and manganese concentration is less than 15 mg/l, an oxidizing filter (natural manganese greensand, manufactured silica gel zeolite coated with manganese dioxide, plastic resin beads, or birm, is recommended. Some filters are coated with a manganese oxide and are regenerated by using a potassium permanganate solution. An oxidizing filter supplies oxygen to convert ferrous iron into a solid form which can be filtered out of the water. Synthetic zeolite is a water softener and while it requires fewer backwashes, it can impact the taste of the water, thought anything might be better than the iron and manganese impacts.

Higher concentrations of iron and manganese can be treated with an aeration and filtration system. This system is not effective on water with iron/ manganese bacteria, but is very effective soluble iron and manganese. In this system an aspirator valve pulls air into the water stream to oxidize the iron and manganese to the carbonate form. The air saturated water then enters a precipitator vessel to allow the iron and manganese time to precipitate out and then is passed through a filter. Backwashing the filter is very important to maintain the filter’s function. This system of removal does not involve any chemical additives.

Chemical oxidation can be used to remove high levels of dissolved or oxidized iron and manganese as well as treat the presence of iron/manganese bacteria. The system consists of a small pump that puts an oxidizing agent into the water before the pressure tank. The water will need about 20 minutes for oxidation to take place so treating before a holding tank or pressure tank is a must. After the solid particles have formed the water is filtered often through a sand filter with aluminum sulfate added to improve filtration. The oxidizing agent is used is chlorine, potassium permanganate or hydrogen peroxide. If chlorine is used, an activated carbon filter is often used to finish the water and remove the chlorine taste. Chlorine oxidation requires a pH of 7 +/_ 0.5. Potassium permanganate is more effective on water with a pH above 7.5, but is poisonous and a skin irritant and requires very careful calibration, maintenance and monitoring. Hydrogen peroxide is less pH sensitive.

Careful monitoring and maintenance of a water treatment is necessary to maintain a high quality of treated water. Testing and maintaining your water supply and treatment system is your responsibility. Without regular monitoring, maintenance and adjustments your results are likely to be disappointing.

Monday, January 3, 2011

Hard Water and Water Softeners

In many parts of the country (including mine) the water contains high levels of dissolved minerals and is commonly referred to as hard. Groundwater very slowly wears away at the rocks and minerals picking up small amounts of calcium and magnesium ions. Before considering treating your water test it to get a full picture of the nature of your water supply. No treatment is without consequences and an inappropriate treatment could create other problems. In addition, the characteristics of the groundwater may change over time. The WaterCheck with Pesticides is an informational test packages targeted to be an affordable option for consumers, thought it costs over $200. The WaterCheck with Pesticide covers 15 heavy metals, 5 inorganic chemicals, 5 physical factors, 4 trihalo methanes, 43 volatile organic chemicals (solvents), and 20 pesticides, herbicides and PCB’s. This relatively “affordable” test will serve as a broad screen of your drinking water and guidance as to what (if any) treatment you might want. After testing my water and considering all the options I determined the best option for me was not to treat.

Water containing approximately 125 milligrams of calcium, magnesium and iron per liter of water can begin to have a noticeable impact and is considered hard. Concentration of magnesium and calcium above 180 milligrams per liter is considered very hard. As the mineral level climbs, bath soap combines with the minerals and forms a pasty scum that accumulates on bathtubs and sinks. You either must use more soap and detergent in washing or use specially formulated hard water soap solutions. These minerals also combine with soap in the laundry, and the residue doesn’t rinse well from fabric, leaving clothes dull. Hard water spots appear on everything that is washed in and around the home from dishes and silverware to the floor tiles and car (though commercial car washes use recycled water and are more environmentally friendly). When heated calcium carbonate and magnesium carbonate are removed from the water and form a scale (lime scale) in cookware, hot water pipes, and water heaters. As the scale builds up more energy is required to heat the water and hot water heater and appliances have work harder which will burn them out eventually. Thus, in hard water locations hot water heaters and other appliances have a shorter life.

There are a number of simple things you can do to reduce the effects of hard water in your home, without having to resort to treating your water, so called softening. My water has elevated levels of calcium and magnesium 170 milligrams per liter yet I do not have a whole house water softener. The simple things to do to address hard water are:
Choose a detergent based laundry product. Some laundry detergents/soaps do not produce as many suds in hard water, these are likely to be soap-based products and do not work as well in hard-water as detergent based products. These days, there are laundering powders and liquids available for a wide range of water hardness. Also, manufacturers often recommend using slightly more detergent to compensate for the hard water. Check the package. Occasionally running your washing machine with vinegar and hot water will clear out the buildup of lime scale.

Reduce the temperature of your hot water heater. When water temperature increases, more mineral deposits will appear in your dishwasher, hot water tank and pipes. By reducing the temperature, you will save money and will reduce the amount of mineral build-up in your pipes and tank. Use rinse agents to remove mineral deposits. There are low pH (acidic) products available to remove mineral deposits from pots and pans and dishwasher. Alternatively, you can use plain white vinegar by using the dishwasher dispenser or placing a cup of vinegar on the dishwasher rack. Boil some white vinegar in your kettle to remove hard water deposits. Drain and rinse your hot water heater annually.

In days past, at the first sign of hard water, domestic water supplies were commonly softened by using a commercial water softening system. Water softening is basically an ion exchange system. The water softening system consists of a mineral tank and a brine tank. The water supply pipe is connected to the mineral tank so that water coming into the house must pass through the tank before it can be used. The mineral tank holds small beads of resin that have a negative electrical charge. The calcium and magnesium ions are positively charged and are attracted to the negatively charged beads. This attraction makes the minerals stick to the beads as the hard water passes through the mineral tank. Sodium is often used to charge the resin beads. As the water is softened, the sodium ions are replaced and small quantities of sodium are released into the softened water, thus the taste.

Eventually the surfaces of the beads in the mineral tank become coated with the calcium and magnesium. To clean the beads, a strong salt solution held in the brine tank is flushed through the mineral tank. Sodium is typically use, but potassium can also be used. The salt ions also have a positive electrical charge, just not quite as strong as that of calcium and magnesium, but the high concentration of salt ions overpowers the calcium and magnesium ions and drives them off of the beads and into the solution. The excess sodium solution carrying the calcium and magnesium is flushed to the septic system. Some sodium ions remain in the tank attached to the surfaces of the beads and the resin is now regenerated and ready to continue softening the water.

The amount of sodium in water conditioning systems is a real problem for humans and the environment. All of the salt is released into the septic system and ultimately the leach field and groundwater. In addition softened water should not be used to water house plants, the salt build up will eventually kill them and they will not thrive. Softened water should also not be used in steam irons or evaporators like evaporative coolers. In addition, while some studies have shown that sodium does not interfere with bacterial action in ATU tanks in alternative septic systems, David Pask, Senior Engineering Scientist of the National Small Flows Clearinghouse has seen septic distribution pipes plugged with a “noxious fibrous mass” that was grease and cellulose from toilet paper that only occurred in homes with water softening systems. He felt the brine in the conventional septic tank had interfered with the digestion of the cellulose fibers and might be carried over into the septic systems drain field. Field practitioners reported to the Small Flows Clearinghouse negative impact from water softening regeneration brines.

Personally, I do not care to add all that sodium to my diet while removing calcium carbonate and magnesium (something that is also sold in pill form for stronger bones). If you must soften your water there is another option. Potassium chloride can be used instead of sodium chloride. Potassium chloride works exactly the same way that sodium chloride does in the softening process and the potassium chloride reduces the amount of sodium in drinking water, the potassium in the treated water is a necessary mineral and it eliminates the excess sodium in the septic system, drain field and released into the environment. Potassium chloride costs much more than sodium chloride. A forty pound bag of pellets costs $36 for Potassium chloride and under $8 for sodium chloride. One final note, though magnetic water softening is sold, according to research done at Perdue University in the 1990’s this method of water conditioning was not effective.

Thursday, December 30, 2010

Water Filtration Systems for the Home

No single water treatment device treats all problems or is appropriate for all homes. Before you attempt a potentially ineffective remedy, the first and most important step is to have your water tested and fully analyzed by a laboratory. Only then will you have a true picture of the condition of your water and what if any treatment is necessary. A couple times a year some workman or other service provider who happens to be in my home or neighborhood tries to sell me a whole house filter system or water softening system. After examining my water analysis, I have no need for a filter system to remove solids. I have no treatment systems installed in my home so I do not need a filter to remove the residue from other treatments.

Filter systems are either activated carbon filters or mechanical filters. Carbon filters also called charcoal filters are water “polishers” they address minor odor and taste issues and are generally the finishing step when water is chlorinated to remove that swimming pool smell and taste. The ground up charcoal absorbs the contaminant and can be used for chlorine, residual pesticides and radon. Activated carbon filters cannot remove nitrate, bacteria or heavy metals. Nuisance bacteria do grow in the carbon medium thus it is important that these filters should be used in bacteria free water. This often results in multi step treatment systems. Filters need to be replaced regularly. These are four basic types of carbon filters (1) faucet mount; (2) in-line; (3) line bypass; and (4) point of entry (POE). Other types of carbon filters are pour through (portable) and specialty filters.

Faucet-mounted carbon filters attach to the kitchen faucet where drinking water comes out. In-line carbon filters are installed beneath the kitchen sink in the cold water supply line and filter all cold water. Line bypass carbon filters are installed in the kitchen under the sink attached to the cold water supply line, but a separate faucet is installed at the sink to provide treated drinking water. The regular tap delivers untreated water. The carbon filter lasts longer because only water used for drinking is treated. Point of entry (POE) carbon filters treat all water entering the home. This type of filter is recommended for treating volatile organic compounds (VOCs) that easily evaporate into the air. Because of the installation costs, size of the filter system and frequency of replacement, these are the most expensive filters to purchase and maintain.

Mechanical filters trap solids and suspended particles in the water by straining the water through a filter cartridge made of spun cellulose or rayon. They remove suspended sediment, sand, and soil (or turbidity). The water pressure forces water through the tightly wrapped fibers around a tubular cartridge that comes in all the types that a carbon filter does. These filters come in a variety of sizes and meshes from fine to coarse, with the lower micron rating being the finer. The finer the filter, the more particles are trapped and the more often the filter must be changed. Fiber filters may not remove all contaminants. If taste and odor problems remain, use a carbon filter after the fiber filter. Often these filters are sold in combination with carbon filters. Fiber filters and replacement cartridges range in price from a few dollars to several hundred dollars. A mechanical filter may become clogged if not cleaned or replace periodically. A clogged filter is one cause of a fall in water pressure. The level of total dissolved solids, TSS or turbidity and water usage will determine the frequency of filter cleaning or replacement required to keep a filtration system functioning. Filters can become hosts to bacterial growth, so that the water should be tested regularly for bacterial presence.

Remember, filters do not purify or soften water. Filters only remove some suspended particles and in the case of the carbon filters dissolved organic compounds that cause disagreeable odors and tastes. These filter systems DO NOT remove nitrate, bacteria or heavy metals.

Monday, December 27, 2010

Limitations of Reverse Osmosis for Home Use




Before you buy a treatment system, you need to know the actual characteristics of your water. The test will identify the bacteria and level of minerals that are present. Proper interpretation of the test results will help determine whether treatment is needed and what type of system or systems to consider. The intended use of the water (drinking only, drinking and cooking, laundry, or all household uses) is essential to determine the what treatment is needed and the type of system to select. There is no single “best” treatment for home use, only treatment types appropriate for certain problems. The water treatment the industry has expanded to marketing treatment systems designed treat (or at least sold to treat ) contaminants that may pose a health hazards. Unfortunately, the industry is inconsistent in the skill and knowledge of the companies and their employees and many of the systems installed are inappropriate, unnecessary or have side effects that create other problems. The free in-home water testing provided by water treatment companies is very limited in scope. The only things that they can test for in the in-home tests are hardness, pH, iron and sulfur. In addition, the sensitivity and accuracy of the tests can be limited. Analysis for organics and bacterial contaminants must be performed in a certified laboratory.
Reverse osmosis systems can be used to reduce the levels of total dissolved solids and suspended matter in drinking water. The principal uses of reverse osmosis in are for the reduction of high levels of nitrate, lead, mercury, arsenic, cadmium, sulfate, sodium and total dissolved solids. Removal effectiveness depends on the contaminant and its concentration, the membrane selected, the water pressure and proper installation. Proper selection of the membrane and pressure is essential when selecting a reverse osmosis system. The membrane must be selected based on complete water analysis otherwise the entire system might be useless. In addition, reverse osmosis systems require regular maintenance and monitoring to continue to function properly over an extended period of time. Reverse osmosis has been shown to remove 83%-92% of nitrates from drinking water in both field and laboratory test. This is probably the most appropriate use of reverse osmosis systems.
I am not a fan of these systems in many applications. They are often sold as (very expensive) accessory item to solve the taste and sodium problem created when a whole house water softener is installed or for feared problems without proper testing. Reverse osmosis systems use a lot of water. They recover only 5 to 15 percent of the water entering the system. The remainder is discharged as waste water. Because waste water carries with it the rejected contaminants, methods to re-cover this water are not practical for household systems. Waste water is typically connected to the house drains and will add to the load on the household septic system. A reverse osmosis system delivering 5 gallons of treated water per day may discharge 40 to 90 gallons of waste water per day to the septic system. This is a significant additional load and could impact the life and functioning of your septic system.
Effectiveness of reverse osmosis system depends on initial levels of contamination, membrane size and type and water pressure. The application of pressure reverses the natural flow of the flow of water in osmosis from high concentration so that water passes from a more concentrated solution to a more dilute solution through a semi-permeable membrane. Reverse osmosis systems incorporate pre and post-filters along with the membrane itself in order for a reverse osmosis system to function properly. It is common to have a whole house filter system utilizing activated carbon installed in series with the reverse osmosis system. In addition, because contaminants are removed by forcing water through a membrane, the membrane requires regular maintenance and cleaning. Reverse osmosis systems are normally used to treat only drinking and cooking water supplies and are often installed under the kitchen sink and requires a permanent connection to an existing water pipe. The filter water is dispensed through the existing sink faucet or a separate tap. Reverse osmosis systems are never not appropriate for treating water supplies that are contaminated by coliform bacteria (neither nuisance nor fecal) because they do not remove bacteria.
Reverse osmosis units on the market range in cost from $300 to $3000 and vary in quality and effectiveness. Homes on well water need to purchase low pressure units which are slightly more expensive than the systems designed for municipal water. The size and membrane type are one of the factors that will determine cost. Replacement membranes cost $100 to $200 and filter cartridges around $50. Reverse osmosis is a proven technology that has been used successfully on a commercial basis most famously for removing salt from seawater. Household reverse osmosis systems typically deliver small amounts (2 to 10 gallons per day) of treated water and waste 7 to 20 times the amount of water treated. Reverse osmosis systems can remove many inorganic contaminants from household drinking water supplies including arsenic, sodium and nitrate. The removal effectiveness depends on the contaminant and its concentration, the membrane selected, the water pressure and proper installation and maintenance.

Thursday, December 23, 2010

Treating Bacterial Contamination in Your Well

If bacteria are found in your water (after verification testing and chlorine shocking) the water can be disinfected. The oldest form of disinfection is chlorination. This method of water purification has been in use for about a hundred years. However, if your water supply becomes contaminated, elimination of the source of contamination is the most permanent solution. Continuous chlorination to kill disease-causing (fecal) bacteria in a contaminated water source should be a temporary measure used only until you can develop a new, sanitary water supply. If fecal bacteria have contaminated a water supply there may also be an associated increase in nitrogen which can be a significant health threat to infants. Let’s be honest here, the most likely source of fecal bacteria is a nearby septic system now focus on the source of fecal contamination and think of the yuck factor. If disease-causing bacteria enter your water supply on a continuous basis, you must eliminate the source or construct a new water supply.

Chlorination is widely used because it readily controls bacteria which may enter your well during construction, repair, flooding or as a result of improper construction. Chlorination can be appropriately used to control nuisance organisms such as iron, slime and sulfate-reducing bacteria. Iron bacteria feed on the iron in the water. They may appear as a slimy, dark-red mass in the toilet tank but microscopic examination is needed to confirm their presence. Iron bacteria colonies may break loose from the inside of pipes and flow through faucets to cause stains in laundry, plumbing fixtures, etc. Though thorough shock chlorination of the well and water system may destroy all iron bacteria colonies within the house; iron bacteria that has penetrated the water-bearing formation will be difficult to eliminate and will likely re-infest the system. In this situation you will need to repeat chlorination treatment periodically or install a continuous disinfection system.

Other nuisance organisms that chlorination can eliminate include sulfate-reducing bacteria which produce a rotten-egg odor. Nuisance bacteria do not cause disease. Proper chlorination will kill these bacteria. Finally, large amounts of iron can be removed from water by adding chlorine to oxidize the clear soluble iron into the filterable reddish insoluble form. Chlorine helps remove manganese and hydrogen sulfide in the same way. In these instances a chlorination system would be installed with a filtration system, the chlorinator first. Chlorination does have drawbacks; it will not remove nitrates from water despite the implied or direct claims of some water treatment firms. Adding chlorine may prevent nitrates from being reduced to the toxic nitrite form; however, nitrates are not removed from water by chlorination.

Chlorine in water is not poisonous to humans or animals. However, if the concentration is great enough the water will have an unpleasant taste and or smell. Some people object to the smell and/or taste of extremely small concentrations of chlorine. In those cases an activated carbon or charcoal filter may be used to remove the chlorine from the drinking water. Chlorination can also produce disinfection by products which are carcinogenic. Trihalomethanes (THMs) are organic chemicals that may form when chlorine is used to treat water supplies that contain humic compounds which are associated with decomposition of organic materials such as leaves, grass, wood or animal wastes. Lifetime consumption of water supplies with THMs at a level greater than 0.10 milligrams per liter is considered by the Environmental Protection Agency to be a potential cause of cancer. THMs can be removed from drinking water through use of an activated carbon filter.

Other methods of disinfecting water include boiling, distilling, treating with ultraviolet light and treating with ozone. Treatment with ultraviolet light and ozonation are replacing chlorination in may water treatment plants and is becoming more popular for home use. Water must be filtered before treatment with UV light. So, unlike chlorination systems, the filtration system is installed ahead of the UV treatment system. The typical single home UV system is a complete unit that includes a filtration cartridges and can be purchased as a whole house unit or an under the sink kitchen installation. UV, like distillation, disinfects water without adding chemicals. It does not create new chemical complexes, nor does it change the taste or odor of the water, and does not remove any beneficial minerals in the water. Ultraviolet devices are most effective when the water has already been partially treated, many units use filtration-sometimes both sediment and a carbon filter to clean the water prior to passing it through the UV light, which results in both disinfected and cleaner tasting water.

Monday, December 20, 2010

Test Your Water Before Purchasing Home Treatment Systems

Single family home water treatment systems were historically intended to treat aesthetic water quality problems. The biggest sellers had historically been water softeners that were universally marketed to all private well owners. Lately the industry has expanded to treatment of contaminants that may pose a health hazard. Unfortunately, the industry is inconsistent in the skill and knowledge of the companies and their employees. Many water treatment companies provide free in-home water testing. This testing is very limited in scope. The only things that they can test for in the in-home tests are hardness, pH, iron and sulfur. In addition, the sensitivity of the tests can be limited. Analysis for organics and bacterial contaminants must be performed in a certified laboratory. The in-home tests are crude tests performed by people without certification and with limited training, the usefulness of the results obtained in this way are limited by the skill and honesty of the tester. Be extremely wary of in-home testing. Sloppy sampling procedures, reusing sample tubes can render the results worthless or misleading.

Before attempting to resolve a perceived water problem, have your water analyzed. Contamination from human and animal waste and chemicals can be a very real health hazard and should be addressed immediately. However, most of the water quality issues with private wells are from naturally occurring contamination. These are often nuisance contaminants that are produced from the underlying soil and rock geology and wildlife. From the underlying rocks radionuclides and heavy metals can enter the groundwater. There are areas with natural occurring arsenic, cadmium, chromium, lead, selenium and fluoride. While some of the symptoms of mineral contamination are obvious, never buy a treatment system until you have tested your water completely at a certified laboratory and identified the correct solution. Other contaminants may be present that need to be addressed or the “condition” may be marginal and can be addressed without installing a treatment system. There are limitations and side effects from all treatment systems. Know what they are. While many natural contaminants such as iron, sulfate, and manganese are not considered serious health hazards, they can give drinking water an unpleasant taste, odor, or color.

The WaterCheck with Pesticides is an informational test packages targeted to be an affordable option for consumers. The WaterCheck with Pesticide covers 15 heavy metals, 5 inorganic chemicals, 5 physical factors, 4 trihalo methanes, 43 volatile organic chemicals (solvents), and 20 pesticides, herbicides and PCB’s. The Minimum Detection Levels, which are the lowest levels at which the laboratory detects that contaminant are below the levels established by the Safe Drinking Water Act so this affordable ($217 including shipping and handling) test will serve as a broad screen of drinking water. Though I know it is tempting to skip the analysis, don’t. Analysis is the only way to make sure you select an effective remedy. Once you know the characteristic of your water you can choose the proper treatment system or plan of treatment. Do not assume that installing a water treatment system similar to a neighbor's will be the best answer to solving your water quality issues. There can be tremendous differences in natural water quality in extremely short horizontal distances.

Though nothing should replace testing your water supply regularly the attached publication from the Virginia Cooperative extension “Home Water Quality Problems-Causes and Treatments” is a quick read and offers suggestions for common problems. Do not treat aesthetic problems that are not a nuisance and test your water completely before you buy any treatment system.